Merci 3G / Wifi pour tes services rendus, bonjour ADSL2+.
--- System Information ---
Vendor: Linksys
ModelName: WAG160Nv2
Firmware Version: A2.00.20 , 2010-06-30T21:05:56
GUI Version: A2.00.20_007
Boot Version: 1.0.37-5.4
Hardware Version: 0.01
--- DSL Information ---
DSL Driver Version: AnnexA version - A2pB023k.d21d
DSL VPI/VCI: 8/35
DSL Status: Showtime
DSL Mode: ADSL2+
DSL Channel:
DSL Upstream Rate: 1121 Kbps
DSL Downstream Rate: 16671 Kbps
Down up
DSL Noise Margin: 9.4 dB 10.6 dB
DSL Attenuation: 23.0 dB 10.4 dB
DSL Transmit Power: 18.8 dBm 12.6 dBm
--- Wireless Information ---
Wireless Driver Version: 1.3.1.174
Wireless Tools Version: 28
Wireless Status: Enabled
Wireless Wide Channel: 3
Wireless Standard Channel: 1- 2.412GHZ
Wireless SSID: ********
--- Dynamic Information ---
LAN Mac Address: 98:FC:11:XX:YY:ZX
WAN Mac Address: 98:FC:11:XX:YY:ZZ
Wireless Mac Address: 98:FC:11:XX:YY:ZY
---
Je n'ai pas (encore) flashé le modem routeur sous Open-WRT, il y a quelques risques de brick, Cf. http://wiki.openwrt.org/toh/linksys/wag160nv2
no pid2
WARNING!! - FIRMWARE HAD BEEN DESTORYED!!
YOU NEED RE-DOWNLOAD FIRMWARE!!
À priori, on peut réinstaller le firmware sans passer par le jtag, en forçant le mode "download". Je testerai ça quand j'aurai et du temps et un autre modem sous la main.